How to Use a Tech Deck

Want to know how to use a Tech Deck? Here’s a quick and easy guide on how to get started with this popular fingerboarding toy.

Checkout this video:


A Tech Deck is a miniature skateboard that you can use to perform tricks. They are a lot of fun to play with and can be a great way to learn new tricks. In this article, we will show you how to use a Tech Deck.

What is a Tech Deck?

A Tech Deck is a type of toy that consists of a miniature replica of a professional skateboard deck. Tech Decks are usually marketed to skateboarding enthusiasts and collectors, and are used for performing tricks and teaching beginners the basics of skateboarding.

Getting Started

A Tech Deck is a miniature skateboard that you can use to perform tricks. They are often used by people who are into skateboarding and want to practice their tricks without having to go to a skate park. Many people also use Tech Decks as a way to show off their skills. If you want to learn how to use a Tech Deck, then you have come to the right place. This article will teach you the basics of using a Tech Deck.

Choose your board

The first step in learning how to use a tech deck is to choose the right board for you. There are three main types of skateboards available:
-Street boards are the most common type of skateboard. They are shorter and lighter than other types of boards, making them easy to carry with you. Street boards are also good for beginners because they are easy to maneuver.
– cruiser boards are a good choice for intermediate skaters. These boards are slightly longer and heavier than street boards, making them stable and durable.
-Longboards are the best choice for experienced skaters. They are the longest and heaviest type of skateboard, making them stable at high speeds.

Choose your trucks

Before you can start skating with your Tech Deck, you need to choose the right trucks. The trucks are the skateboard-like attachments that hold the wheels in place. You have a choice of two different sizes: 96mm and 120mm. The size you choose will depend on your skating style and what kind of tricks you want to do.

If you want to do street skating or basic skateboarding tricks, go with the 96mm trucks. For more advanced tricks, like flips and manuals, you’ll need the 120mm trucks.

Once you’ve chosen your trucks, it’s time to assemble your Tech Deck.

Choose your wheels

Now that you have your board, it’s time to choose your wheels. The first thing you need to do is figure out what size wheel you need. You can find this information on the side of your deck, in the trucks or on the wheels themselves. Once you know what size you need, it’s time to pick out a style.

  How to Become an X-Ray Technician

There are two main types of skateboard wheels: hard wheels and soft wheels. Hard wheels are made of polyurethane and are designed for street skating and concrete parks. They are usually smaller, harder and provide more speed and stability for skating tricks. Soft wheels are made of polyurethane with an added element called “suppleness.” This makes them softer, grippier and slower than hard wheels. They’re better suited for skating ramps, pools and vert (half-pipe) skateboarding.

Most beginner skateboards come with hard wheels, but if you know you’ll be doing a lot of Vert skating, it might be worth investing in a set of soft ones. You can always switch them out later if you decide you want to try something different.

Assembling your Tech Deck

Your Tech Deck comes with 72mm pro-series wheels, five bearings, one Philip head and one hexagon head driver, eight spacers, and one set of hardware. With these easy-to-follow instructions, you will have your Tech Deck up and running in no time!

Attach the trucks to the board

Now that you have your Tech Deck and all of its parts, it’s time to assemble it. Start by attaching the trucks to the board. Take the two trucks and line them up with the holes at the top of the board. Next, take the four screws that came with your Tech Deck and screw them in to secure the trucks in place.

Attach the wheels to the trucks

To attach the wheels to the trucks, first find the kingpin. The kingpin is a metal rod that sticks out of the hanger (the U-shaped metal part that the axle is attached to). The kingpin is what allows the hanger to turn, and it’s also what keeps the wheels attached to the deck.

There are two ways to attach the wheels to the trucks. The first way is with speed washers, which are washers that have a small hole in the center. To attach the wheel to the truck using a speed washer, put the speed washer on the axle, and then put the wheel on top of it. Then, use a Phillips head screwdriver to screw in a speed nut (a nut with a small hole in the center).

  What Does a Pharmacy Technician Do?

The second way to attach the wheels to the trucks is with bearings. Bearings are small, round disks that go between the wheel and the axle. To attach a bearing to a truck, first put an axle spacer (a small metal or plastic cylinder) on the axle. Then, put a bearing on top of it. Next, put another axle spacer on top of that bearing, and then put another bearing on top of that. Finally, put a locknut (a nut that has left-hand threads) on top of that second bearing.

Riding your Tech Deck

Before you ride your Tech Deck, you need to make sure that it is properly set up. The first thing you need to do is to tighten the screws on the deck. You can use a Phillips head screwdriver for this. Next, you need to adjust the trucks. The trucks are the metal parts that connect the wheels to the deck. You need to make sure that they are not too loose or too tight.


There are a few ways to push on your Tech Deck. You can do a basic push, an atomic push, or a power slide.

To do a basic push, place your front foot near the center of the deck and your back foot at the tail. Bend your knees and lean forward slightly, then push off with your back foot to move forward.

To do an atomic push, place your feet in the same position as for a basic push. But instead of pushing with your back foot, jump up and land on your front foot, using it to propel yourself forward.

To do a power slide, start in the same position as for a basic push. But this time when you push off with your back foot, lift your front foot off the deck and slide it along the ground in front of you. As you do this, lean forward and keep your weight over your back foot to maintain balance.


One of the most basic and important tricks you can do on your Tech Deck is turning. You can turn left or right, and you can even do a full 180-degree turn. To turn left or right, start by balancing your Tech Deck on its back trucks (the wheels in the center of the board). When you’re balanced, put your front foot on the front of the board and your back foot on the back. Then, lean in the direction you want to go. For a left turn, lean to the left; for a right turn, lean to the right. As you lean, your weight will transfer to the side of the board, and it will start to turn. Keep leaning until you’ve made your turn, then straighten up and balance yourself on the new track.

  How to Become a Med Tech in 4 Steps

A 180-degree turn is just like a regular turn, except that you end up going in the opposite direction from where you started. To do a 180, start by balancing your Tech Deck on its back trucks. Put your front foot on the front of the board and your back foot on the back, then lean to one side or the other until you’ve made half of a 360-degree spin. As youlean over, transfer your weight from one foot to the other so that both feet end up on top of the deck when you’ve completed the spin. Once you’re balanced again, Straighten up and ride away!


To stop on your Tech Deck, you will need to apply pressure to the back foot. Put your back foot on the board and lean back slightly. The goal is to apply pressure evenly to both the wheels. When you are first starting out, you may find it easier to put more pressure on the rear wheel. As you get more comfortable with riding, you may want to experiment with putting more pressure on the front wheel.

Maintenance and Troubleshooting

A Tech Deck is a type of skateboard that is popular among skateboarders and street skateboarders. They are usually made of plastic and are about the size of a credit card. They are also very lightweight, which makes them easy to carry around. If you are new to skating, you may be wondering how to use a Tech Deck. This article will cover the basics of how to use a Tech Deck, as well as some maintenance and troubleshooting tips.

Cleaning your Tech Deck

To keep your Tech Deck in good condition and prolong its life, you should regularly clean it. You can Clean your Tech Deck with a cloth dampened with isopropyl alcohol. Be sure to wipe the cloth along the length of the deck, not across it. You don’t want to damage the bearings or other parts of the deck.

Fixing a flat spot

If your deck develops a flat spot, it can usually be fixed by re-shaping the deck. Lay the deck on a hard, flat surface and use your hand to gently bend the deck back into its original shape. If this doesn’t work, you may need to replace the deck.

Scroll to Top