How to Do a Tech Deck Trick

If you’re looking to learn how to do a tech deck trick, you’ve come to the right place! In this blog post, we’ll walk you through the steps needed to perform a basic tech deck trick. By following these simple instructions, you’ll be impressing your friends and family in no time!

Checkout this video:

Introduction

A Tech Deck is a type of finger skateboard that is popular among kids and adults alike. While most people use Tech Decks simply for transportation or for doing tricks, there is a whole subculture and competitive scene surrounding the sport. If you’re interested in learning how to do a Tech Deck trick, there are a few things you need to know first.

What You Need

To do a Tech Deck trick, you will need:
-A Tech Deck
-A flat surface
-A smooth, even surface to practice on

The Ollie

Learning how to do a Tech Deck trick is not difficult, but it does take some practice. The most basic and essential trick is called the Ollie. This move is the foundation for almost all other Tech Deck skateboarding tricks.

To perform an Ollie, start with your feet shoulder-width apart, centered over the board. Place your back foot on the tail of the board and your front foot near the center, just behind the front trucks. Bend your knees and lean forward slightly, then jump up quickly while sweeping your back foot forward and flicking your wrist upward. As you jump, simultaneously snap your back foot down onto the deck while letting go of the board with your front hand.

The key to this trick is timing and practice. It may take a few tries to get the feeling for it, but once you nail it you’ll be able to use this fundamental move to perform all sorts of other tricks.

The Kickflip

The Kickflip is one of the most popular and recognizable tech deck skating tricks. This move is perfect for beginners who are just learning how to do tech deck tricks, as well as experienced skaters who want to show off their skills. Here’s how to do a Kickflip on a tech deck:

1. Start by holding your tech deck in your dominant hand with the wheels facing down.

2. Place your non-dominant hand on the ground for balance.

3. Use your dominant hand to flick the front of the tech deck upward while simultaneously kicking your back foot forward.

4. As the tech deck flips in the air, catch it with your dominant hand and land on the ground with both feet firmly planted.

  When Did Oreilly Leave Fox News?

The Heelflip

The heelflip is a classic skateboarding trick that can also be done on a Tech Deck. To perform a heelflip, you’ll need to place your thumb on the back of the deck and your first two fingers on the front. Next, quickly flick your wrist in an upward motion. This will cause the deck to spin in the air and flip over. When it lands, make sure that your fingers are still in the same position so that you can catch the deck and land the trick successfully.

The Pop Shuvit

First, find a ledge or curb that you can use for your tech deck trick. Place your tech deck on the ground so that the truck is hanging over the edge of the curb. You will need to be able to pop the deck up in the air and then have it land on the ground again.

To do the pop shuvit, place your front foot on the deck and your back foot slightly behind it. You will then use your front foot to pop the deck up into the air while you use your back foot to shove it forward. The deck should rotate one-quarter turn before landing on the ground again.

The Impossible

The impossible is a tech deck trick that looks just that, impossible. But with a little bit of practice, you can pull it off like a pro. Here’s how it’s done:

1. Start by riding your tech deck on the front truck.

2. Next, put your foot on the board and roll forward until the back truck is in the air.

3. Now, quickly jump off the board and land on your back foot, catching the back truck with your toe as you land.

4. For the final touch, hop off your back foot and ride away cleanly!

The Varial Kickflip

The varial kickflip is a complex move that can take some time to master. But once you’ve got it down, it’s a surefire way to impress your friends. Here’s how to do it:

1. Start with your tech deck on the ground in front of you.

2. Place your front foot on the deck, around the middle of the deck.

3. simultaneously lift your back foot and kick the deck forward, using your front foot to guide the deck as it flips over.

  Where Is Lester Holt From Nbc Nightly News?

4. As the deck begins to flip, use your back foot to give the deck a little extra spin. This will help ensure that the deck completes a full rotation before landing back on the ground.

5. Practice this move slowly at first, until you get a feel for how much power you need to generate with your kick. With a little practice, you’ll be nailing Varial Kickflips in no time!

The 360 Flip

The 360 flip, also sometimes called a tre flip, is a skateboarding trick that looks impressive and is not too difficult to learn. With a little practice, you should be able to land this trick consistently. Here’s how to do it:

1. Start with your front foot on the nose of the deck and your back foot in the middle of the board. Keep your weight balanced evenly between your two feet.

2. Bend your knees and lower yourself into a crouch. This will give you more control when you pop the board off the ground.

3. Transfer your weight to your back foot and use your front foot to flick the board up into the air. As the board starts to come up, jump off the ground and spin around 360 degrees in either direction. Catch the board with your feet in the same position as when you started (front foot on nose, back foot in middle).

4. Ride away cleanly and enjoy impressing your friends with your newly learned skateboarding skill!

The Bigspin

A bigspin is a skateboarding trick in which the skateboarder spins 360 degrees or more on the nose or tail of the board. The bigspin can be done on flat ground, on a ramp, or over a set of stairs. Bigspins are considered to be one of the most difficult skateboarding tricks to learn.

There are a few things that you need to know before you attempt a bigspin. First, you need to be able to do a basic 360 spin on your tech deck. If you can’t do this, you’re not ready for a bigspin. Second, you need to have a good sense of balance. If you’re not confident in your ability to stay upright on your board, you’re not going to be able to land a bigspin. Third, you need to be patient. Learning how to do a bigspin takes time and practice.

If you think you’re ready to try a bigspin, here’s what you need to do:

1. Find a flat surface that is large enough for you to safely complete a 360 spin. A parking lot or driveway is ideal.

  How Much Money Does a Radiology Technician Make?

2. Place your tech deck in the center of the chosen surface.

3. Put your front foot in the center of the deck and your back foot near the tail of the deck. You should be in an “arrow” stance with your feet pointing in opposite directions.

4. Place your non-dominant hand on the ground for balance and use your dominant hand to grab the nose of the board with an overhand grip. Your fingers should be pointing towards the ground and your thumb should be pointing towards your body.

5 .Lift the tail of the board off the ground so that only the nose is touching the ground (this is called an “air position”).
You may need to lean backwards slightly in order to keep equilibrium and avoid tipping forwards off of The only part of your body that should be touching the ground is Your non-dominant hand should still be touching The surface for balance . If You feel like You are going To fall forwards , try leaning back further or placing Your other hand on The ground as well For support . once You are in The air position , it’s time To begin spinning The trick consists Of two parts : The mount And dismount .

6 For The mount , quickly pull up On The nose Of The board With Your dominant hand While scooting Backwards With Your feet so That You end up In an “open star” stance with one leg stretched out behind You And one leg stretched out In front Of You . Your knees should be Bent and Your ankles should Be flexed In order To increase Rotational speed . As soon As You reach The open star stance , begin spinning by kicking Your front leg outwards while Scooping downwards With Your back leg So That both legs end up Horizontal To The ground In A sort Of “superman” position once You have Achieved This position , keep Spinning Until You complete Three full rotations Or more ( depending On how much momentum You were Able To generate ) before beginning The dismount .

7 For The dismount , quickly Reverse directions Byuncurling Your legs so That they point Towards each other In A sort Of “seated position” while also Pushing down OnThe noseOfThe board WithYour dominant hand In orderTo lowerThe tailBack downToThe ground This will reverseYour directionOfSpin soThatYou endUpfacingThe opposite DirectionthatYou were whenYou beganThe trick onceYouhave reversedSpinandloweredthetailback down, simply rideOutofThe trick by Pushing offwithYour feetandreturningToa normalstanceonYour techdeck

Scroll to Top